Jaguar XE Forum banner

How do I remove the chrome exterior trim

6K views 5 replies 4 participants last post by  RoJo 
#1 ·
How can I remove the chrome trim from the rear passenger door. It has been scratched. Any help appreciated. Thank you Colin
 
#3 ·
2017.0 XE (X760), 501-08
Exterior Trim and Ornamentation
Rear Door Upper Finisher (G2246175)
REMOVAL AND INSTALLATION
Removal
NOTES:

This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.

This procedure contains illustrations showing certain components removed to provide extra clarity.

E220310
Lower the rear window.
_img 1.jpg
E220856
Release the rear upper door frame seal.
_img 2.jpg
E220355
Remove the upper door trim panel.
_img 3.jpg
E220356
Remove the upper door finisher retaining screws.
CAUTION:
_img 4.jpg
Use a suitable trim tool.
E222058
Remove the upper door finisher.
_img 5.jpg
Installation

Install the upper door finisher.
Install the upper door finisher retaining screws.
Install the upper door trim panel.
Install the rear upper door frame seal.
 
#5 ·
Fighterpilot said:
2017.0 XE (X760), 501-08
Exterior Trim and Ornamentation
Rear Door Upper Finisher (G2246175)
REMOVAL AND INSTALLATION
Removal
NOTES:

This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.

This procedure contains illustrations showing certain components removed to provide extra clarity.

E220310
Lower the rear window.
_img 1.jpg
E220856
Release the rear upper door frame seal.
_img 2.jpg
E220355
Remove the upper door trim panel.
_img 3.jpg
E220356
Remove the upper door finisher retaining screws.
CAUTION:
_img 4.jpg
Use a suitable trim tool.
E222058
Remove the upper door finisher.
_img 5.jpg
Installation

Install the upper door finisher.
Install the upper door finisher retaining screws.
Install the upper door trim panel.
Install the rear upper door frame seal.
Is there a link to where I could find such instructions from? Wouldn't want to bother people by asking on the forum if I could.

Also, by any chance do you have the instructions for the front?

One of my mates helped me to dechrome by wrapping, but the edges keep coming up... Thought of plastidipping them myself..

Thanks a bunch!
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top