Page 1 of 3

Flat Boot Floor For Spare Wheel

Posted: Wed Apr 18, 2018 12:23 pm
by strenner
My dealer had a spare wheel, jack and brace assembly, to replace the pump and gel, but I still have the wrong boot floor.
Any ideas where to obtain the flat version that sits over the spare wheel, is it just a dealer only supply?

Re: Flat Boot Floor For Spare Wheel

Posted: Wed Apr 18, 2018 4:25 pm
by strenner
Thanks for the info, looks like a trip to the dealers then

Re: Flat Boot Floor For Spare Wheel

Posted: Wed Apr 18, 2018 4:55 pm
by BOBCDP
You can buy them on eBay for about £40. Not exactly the same thing as the official version but it’s in the boot so why worry?

Re: Flat Boot Floor For Spare Wheel

Posted: Wed Apr 18, 2018 4:57 pm
by alanplum241276
I couldn’t find any on eBay. Just the bent ones for goo. I also bought a semi Rigid boot liner thinking that would do but no. Too soft. You must have the flat floor.

Re: Flat Boot Floor For Spare Wheel

Posted: Wed Apr 18, 2018 7:01 pm
by BOBCDP

Re: Flat Boot Floor For Spare Wheel

Posted: Wed Apr 18, 2018 7:21 pm
by strenner
Thanks for that, but I think that’s just a liner, it’s the actual carpeted load floor that’s covers the battery/spare wheel well that I need. I know Brit Car can get them but it’s actually cheaper from the dealer.

Re: Flat Boot Floor For Spare Wheel

Posted: Thu Apr 19, 2018 10:54 am
by alanplum241276
Bad news. That part number I put earlier isnt correct. Just went to collect it and its the same floor as the goo, e.g. bent.

Even though the "internet" told me that was the one for the mini spare.

The dealer has ordered T4N23569 in it's place which is what he reckons is the correct part.

Will find out tomorrow.

Re: Flat Boot Floor For Spare Wheel

Posted: Thu Apr 19, 2018 10:58 am
by PhilB
It's the world's most expensive bit of plywood covered in cheap furry stuff!
:lol:
You probably realise you need the one with "bingo wings" that slot into the side cut-outs.
This one still bends in the middle on a hinge as they all do though.

20160112_102451.jpg


Re: Flat Boot Floor For Spare Wheel

Posted: Thu Apr 19, 2018 11:58 am
by strenner
PhilB wrote:
Thu Apr 19, 2018 10:58 am
It's the world's most expensive bit of plywood covered in cheap furry stuff!
:lol:
You probably realise you need the one with "bingo wings" that slot into the side cut-outs.
This one still bends in the middle on a hinge as they all do though.

20160112_102451.jpg
Phil does yours by any chance still have the part number sicker still on the underside? Would be nice to get confirmation on the correct part number, as even the dealers seem baffled

Re: Flat Boot Floor For Spare Wheel

Posted: Fri Apr 20, 2018 10:17 am
by alanplum241276
100% confirmation that part number T4N23569 is the correct one.

Just picked mine up and it is *perfect*